Eberspacher EasyStart Remote+ Operating instructions Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
6 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
2 OVERVIEW
EASYSTART REMOTE
+
MOBILE UNIT
The mobile unit of the EasyStart Remote
+
radio
remote control can be used to make the necessary
settings for operation of the heater and / or the add-
on unit.
BUTTON FUNCTIONS
LONGPRESS button
The button must be pressed for longer than 2 sec-
onds.
The heater is switched on immediately if ON or OFF
appears in the display (except if programming is run-
ning or while making settings).
SHORTPRESS button
The button must be pressed for less than 2 seconds
if the display shows OFF mobile unit ON, the
Start display appears.
a selected function is confirmed.
inputs are confirmed.
LONGPRESS button
The button must be pressed for longer than
2 seconds
all functions are ended.
if the display shows OFF mobile unit ON, the
Start display appears.
SHORTPRESS button
The button must be pressed for less than 2 seconds
the displayed, activated function is ended, other
activated functions are retained.
With each SHORTPRESS the display changes to a
next-higher level up to Start display.
The mobile unit is in submenu the setting is
exited, already set values are not saved.
if the display shows OFF mobile unit ON, the
Start display appears.
Press
button 1x / keep pressed
Mobile unit is in the Main menu and the Start
display appears in the Menu bar the next, right-
hand symbol appears in the middle and flashing.
Mobile unit is in the submenu the displayed
value is changed (larger), or the next selection is
displayed.
Press
button 1x / keep pressed
Mobile unit is in the Main menu in the Menu bar
the next, left-hand symbol appears in the middle
and flashing.
Mobile unit is in the submenu the displayed
value is changed (smaller), or the next selection is
displayed.
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comentarios a estos manuales

Sin comentarios